Electrodeposited nanolaminated CoNiFe cores for ultracompact DC-DC power conversion
Laminated metallic alloy cores (i.e., alternating layers of thin film metallic alloy and insulating material) of appropriate lamination thickness enable suppression of eddy-current losses at high frequencies. Magnetic cores comprised of many such laminations yield substantial overall magnetic volume, thereby enabling high power operation. Previously, we reported nanolaminated permalloy (Ni80Fe20) cores based on a sequential electrodeposition technique, demonstrating negligible eddycurrent losses at peak flux densities up to 0.5 T and operating at MHz frequencies. This paper demonstrates improved performance of nanolaminated cores comprising tens to hundreds of layers of 300-500 nm thick CoNiFe films that exhibit superior magnetic properties (e.g., higher saturation flux density and lower coercivity) than permalloy. Nanolaminated CoNiFe cores can be operated up to a peak flux density of 0.9 T, demonstrating improved power handling capacity and exhibiting 30% reduced volumetric core loss, attributed to lowered hysteresis losses compared to the nanolaminated permalloy core of the same geometry. Operating these cores in a buck DC-DC power converter at a switching frequency of 1 MHz, the nanolaminated CoNiFe cores achieved a conversion efficiency exceeding 90 % at output power levels up to 7 W, compared to an achieved permalloy core conversion efficiency below 86 % at 6 W.