Surface Micromachined High Frequency Inductors in Electroplating and Screen Printing Process
In this paper, electroplating, screen-printing, and surface micromachining technologies are utilized to realize integrated high frequency inductors with compatible integration with chips, sensors, and other components. Various micromachined inductors with different geometries and magnetic core materials are investigated for selecting appropriate magnetic materials and geometries for high frequency applications. The processing steps chosen are all low-temperature, which allows the use of low cost substrates such as MCM-L compatible materials. The integrated inductors with electroplated magnetically anisotropic cores have inductance in the range of 1∼ 5 μ H up to 5 MHz, dc resistance in the range of 0.3∼ 1.5 ohms. The screen-printed spiral inductors with composite soft ferrite cores have inductance in the range of 0.3∼ 0.4 μ H at up to 10 MHz, dc resistance in the range of 0.5–1.2 ohms. The large suspended air core spiral-type inductors have inductance in the range of 20∼ 70 nH and quality factors of 50∼ 150 in the range of 400∼ 800 MHz, respectively.
Similar Publications:
In this paper, compact passive type triplexer was newly designed and fabricated for US-CDMA handset applications. The newly designed triplexer circuit was co...
In this paper, FR-4 embedded RF spiral inductors with hetero dielectric layers were newly designed, fabricated, and characterized in order to improve their q...
All of the biosensors which are commercially available are based on the enzymatic electrochemical analysis. Thus, they are disposable due to the use of the e...
In this paper, ultra-low voltage operated piezoelectric RF MEMS in-line dc contact switches with serial and shunt configurations have been realized by using ...